Download and Install Latest Stock Firmware for Micromax Canvas 1
Download Micromax Canvas
Micromax Canvas 1: Full Phone Specification:
Micromax Canvas 1 was released in July 2017. The device comes with Android 7.0 (Nougat). It runs on 1.3GHz Quad-Core MediaTek MT6737 Processor. The device comes with 2GB RAM and 16GB of internal storage. About the camera, it comes with an8-Megapixel Primary Camera and a 5-Megapixel Front Camera. The handset comes with a 5.0-inches LCD IPS display with a resolution of 720×1280 pixels.
The handset comes with a small 2500 mAh non-removable battery. Sensors like Proximity Sensor, Gyroscope, Ambient Light Sensor, Accelerometer are present in this device.
Download Latest Stock ROM for Micromax Canvas 1:
- Link to Download the Firmware: Download it from here.
Micromax Canvas 1: Stock ROM and Firmware Details:
- Model: Micromax Canvas 1
- Release Date: 23.06.2017
- Android Version needed: Android 7.0 (Nougat)
- UI Version: Stock Android
- Status: Official
- Country: All
- File Size: 1.6GB
Guide to Install the Stock ROM Firmware:
- First of all, you need to download the Stock Firmware from the link shared above.
- Now, unzip the zip file.
- After this, install the Driver from thedriver folder.
- Now, install YGDP_assembly.exe fromDesktop or “C:\Program Files (x86)”.
- Enter 9527 or 369 as the password for logging into this tool.
- Click on config in YGDP tool.
- Now, add “CPB” file from “Firmware”folder then click on apply.
- After this, Switch off your device.
- Now, click on start in YGDP tool.
- Switch off your device and connect to PC using the USB cable.
- That’s it, your device is ready!
Note: After the whole process finishes, your device will take at least 5-10 minutes to boot. So please don’t get worried.
For any query please do comment down, am here to help you!
Post a Comment
Post a Comment